Electric gynecological chair GYN-LIFT – fully automatic

The GYN-LIFT gynecological chair from JS Medical Bulgaria is specially equipped with an electric motor for height and seat adjustment.The working height of the fully electric GYN-LIFT gynecological examination chair can be continuously adjusted up to 1160 mm (measured at the front edge of the seat) when both motorized adjustment ranges are fully used.The ergonomic upholstery of the backrest and seat of this gynecological chair provides a very high level of comfort. The integration of a foam wedge in the back eliminates the need for additional support. A cut is built into the seat of this modern gynecological chair.The electric gynecological examination chair is equipped with electric height adjustment (650 – 850 mm).Thanks to the precise double square guides, height adjustment is carried out without lateral displacement.A Trendelenburg position of 30° can be achieved using the electric seat lift and the adjustable backrest, and the backrest can be adjusted up to + 54°.The maintenance-free and extremely quiet electric drives used are controlled by a foot switch.The adjustment systems of the electric gynecological chair are equipped with push-buttons.Motor connection values ​​(each): 230V, 50/60 Hz, 3.7A, 850W, IPX4, v=11mm/s, 10,000N.The floor frame of the electric gynecological examination chair is equipped with leveling feet, ensuring a stable and stable position.The impact- and scratch-resistant covers of the column and the main frame of the chair, like all other components, are easy to clean and keep hygienically clean.The different thicknesses of the seat upholstery (85 mm) and backrest (85 – 135 mm) ensure a very high level of seating comfort.The GYN-LIFT gynecological examination chair is equipped with a cutout in the seat cushion.A pair of standard rails made of stainless steel, measuring 25 x 10 mm, 350 mm long, are attached to the sides of the seat of the electric gynecological examination chair, for the placement of leg support systems.The stainless steel tray holder, measuring 300 x 200 x 65 mm (L x W x H), is fixed to the top cover.On the right and left of it there are three hexagon screws for attaching a colposcope holder.An earthing socket is integrated into the rear of the column, e.g. for connecting a colposcope.